info@cit-hadley.com | 724-253-3161
info@cit-hadley.com      724-253-3161

Welded Leadwires for Lighting.

CIT Hadley / Products & Services / Welded Leadwires for Lighting

3-Piece Welded Leadwires for Lighting

Our capabilities are not limited to the specifications below, which should be considered as general guidelines only. To review your specific requirements, please contact us at info@cit-hadley.com.

High Wattage Lamps

150 & 200W Lamps

High Pressure Discharge Lamps

Soft Glass

Hard Glass

  • High Pressure Mercury Lamps > or = 250 Watts
  • High Pressure Sodium Lamps > or = 150 Watts
  • Metal Halide Lamps

Special Purpose Leadwires

Hook Leads
The hook is formed at the end of the inner section and serves as a clamp for the lamp filament.

Flattened Leads
The flattened part is 6-12 mm according to wire diameter.


3-Part Welded Leads for Lighting

For 3-piece welded leadwires, standard materials available for the inner leadwire include Pure Nickel, Nickel (Mn), Nickel Plated Steel (NPS), FeNi 48, Nickel Plated Copper (NPC), Nickel Plated Copper Tin (NPCuSn) in either a hard or soft temper. Standard materials available for the press or seal include Dumet, Tungsten, or Molybdenum in either borated or oxidized finish.  standard materials available for the outer leadwire include Copper, CCS (30% or 40% IACS), Nickel-Copper (Ni67 CU33), Monel, CuSn (Bronze), or Twisted NiCu Wire. Other materials available by request

We package to your specifications including divided flat packs, plastic tubes or other customer specification. These welded leadwires are supplied to an agreed quality statistical process control on critical parameters provided by the customer or per our own specification.

With years of experience, CIT has been able to develop many special welding solutions. Please contact us to discuss your unique needs.

2-Piece Welded Leadwires for Lighting

Our capabilities are not limited to the specifications below, which should be considered as general guidelines only. To review your specific requirements, please contact us at info@cit-hadley.com.

  1. Soft Glass
    • Neon Glow Lamps
    • Florescent Tubes
  2. Hard Glass
    • H4 Car Head Lamps
    • Halogen GLS
    • Low Wattage Halogen
    • Lamps
    • Electronic Flash Tubes

2-Part Welded Leads for Lighting

For 2-piece welded leadwires, standard materials available for the inner leadwire include Pure Nickel, Nickel (Mn), Nickel Plated Steel (NPS), FeNi 48, Nickel Plated Copper (NPC), Nickel Plated Copper Tin (NPCuSn) in either a hard or soft temper. Standard materials available for the press or seal include Dumet, Tungsten, or Molybdenum in either borated or oxidized finish. Other materials available by request

We package to your specifications including divided flat packs, plastic tubes or other customer specification. These welded leadwires are supplied to an agreed quality statistical process control on critical parameters provided by the customer or per our own specification.

With years of experience, CIT has been able to develop many special welding solutions. Please contact us to discuss your unique needs.

 

Back to Top